二手 KOCH 型号 BL 2500 NC select line 钻孔自动机，KOCH BL 2500 NC select line（2019年）

KOCH BL 2500 NC select line

- Magazine loading system
- Clamping table for frame parts
- 3 horizontal, longitudinal drilling units from the rear
- 4 vertical drilling units from above

1 Drilling machine
Manufacturer: KOCH
Type: BL 2500 NC select line
- used -

Year of manufacture: 2019
Workpiece dimensions
Workpiece length 150 - 2500 mm
Workpiece width 20 - 300 mm
Workpiece thickness 10 - 50 mm
Material: Solid wood
Magazine loading system 1
with workpiece return. Workpiece insertion via 2
parallel-controlled servomotors.
The number of workpieces in the magazine depends
on the workpiece weight.
Manual workpiece insertion
Clamping table for frame parts 1
By inserting 3 support segments into the
longitudinal drilling units, workpieces can be
inserted manually and clamped with clamping cylinders
and templates. This also allows for
special workpiece dimensions. Work cycle triggering via
2 manual controls on the swappable control panel.
3 horizontal, longitudinal drilling units from the rear
Construction width 160 mm
Drilling motor 2 kW
Longitudinal adjustment (X) with LCD display
Vertical adjustment (Z)
With dust extraction
4 vertical drilling units from above
(supported on one side in a linear guide)
Adjustable over the entire working width (X), reading
LCD display.
Adjustable in working depth (Y), reading LCD display
One vertical clamping cylinder mounted directly on the unit
Counterpieces for through-holes are available as an option.
Drilling motor 1.5 kW at 50 Hz
Drilling stroke 50 mm
Speed 2,800 rpm
Total drill length 70 mm
With 4 rotary indexing heads with quick adjustment (for vertical
drilling units)
with fixed stops at 0 and 90 degrees
Positioning control KOCH NUMERIC Basic 1
Kjdpfxjzuynho Abysna
Positioning control with
Beckhoff C6920 industrial PC
Intel Celeron 2.2GHz CPU
2.5 320GB HDD
1x RS232, 2x USB, 1x Ethernet available
15-inch touch panel
Operating system Windows 7: English
User interface in English
Input of all machine commands via the touch panel
Software is prepared for an online connection.
The configuration of the online connection (network) and
commissioning are carried out by the customer or their
software company.
USB port on the PC
4 x Dynamic NC axis (with bearing control)
for Z axes
Connection data 1
Electrical connection 400 V, 50 Hz, 3 phases
Voltage fluctuations max. + 6 % to - 10 %
If protected by an RCD (residual current device) on the customer's side,
an all-current sensitive (R CCB, Type B) RCD with a
rated residual current of /= 300 mA must be used.
Air connection 7 bar
Dust extraction air velocity min. 30 m/s
Note:
The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

该广告为自动翻译，可能存在翻译错误。