研磨厂Jehmlich
REKORD 630-SSt
研磨厂
Jehmlich
REKORD 630-SSt
出厂年份
2024
状况
全新
位置
Herzogenburg 

显示图片
显示地图
机器数据
价格和位置
- 位置:
- Herzogenburg, 奥地利

拨打
技术细节
- 额定功率:
- 90 千瓦 (122.37 马力)
- 最大转速:
- 5,760 转/分
- 转速(最小):
- 1,592 转/分
- 总高度:
- 3,437 毫米
- 总长度:
- 3,275 毫米
- 总宽度:
- 2,500 毫米
- 冷却类型:
- 空气
- 压缩空气连接:
- 6 横杆
- 设备:
- 转速可无级变速
优惠详情
- 广告编号:
- A20646785
- 更新:
- 最近更新时间为 01.12.2025
描述
The impact mills of the REKORD 212-630 series in the welded housing design are robust universal mills for demanding industrial applications in continuous operation.
● Size: 630 mm (nominal rotor diameter)
● Mill housing: Heavy-duty welded stainless steel housing, pressure surge resistant up to 10 bar (AISI316L), with product-contacting surface finish Ra ≤ 1.6 μm for easy cleaning, equipped with a pivoting door and safety interlock type HAAKE (key transfer system); monitoring of housing and bearing temperature, vibration monitoring
● Mill inlet: JACOB pipe; DN 150 mm
● Mill outlet: Ground material and air discharge downward into a suction hopper, optimized for connection to the conveying line to the total separator
● Mill drive: Belt drive, three-phase motor, energy efficiency class IE3 (manufacturer SIEMENS), 90 kW, 3~ 400 V, IP55; suitable for operation with frequency inverter
● Sealing materials: Silicone; PTFE, sealing material conforms to EU and FDA food hygiene standards
● Grinding elements: Pin rotor: 4 pin rows, pin Ø 7 mm (wear-reduced); Pin stator: 3 pin rows without external pin circle, pin Ø 7 mm
● Bearings: Designed for toughest operational demands in continuous industrial service, heavy-duty bearing housings with temperature and vibration monitoring (early detection of potential bearing failure and avoidance of hot surfaces)
● Inert gas supply/monitoring for shaft seal on product chamber side
Hedpfjx Ac Rbex Ac Njff
● Run monitoring to detect operating faults
● Machine frame: The complete unit – mill, drive with motor, tensioning rails, belt drive, and belt guard – is installed ready for use on a sturdy machine frame with height-adjustable machine feet
Main components of the offered system include:
● Product feed/transfer from customer’s upstream process and transfer to a rotary valve (certified ATEX protection system);
● Industrial pin mill type REKORD 630-SSt with welded housing and ground surfaces;
● Product separator with discharge rotary valve (certified ATEX protection system);
● Pneumatic conveying line with air inlet/outlet, including suction blower;
● WITHOUT control system, without frequency inverter
该广告为自动翻译,可能存在翻译错误。
● Size: 630 mm (nominal rotor diameter)
● Mill housing: Heavy-duty welded stainless steel housing, pressure surge resistant up to 10 bar (AISI316L), with product-contacting surface finish Ra ≤ 1.6 μm for easy cleaning, equipped with a pivoting door and safety interlock type HAAKE (key transfer system); monitoring of housing and bearing temperature, vibration monitoring
● Mill inlet: JACOB pipe; DN 150 mm
● Mill outlet: Ground material and air discharge downward into a suction hopper, optimized for connection to the conveying line to the total separator
● Mill drive: Belt drive, three-phase motor, energy efficiency class IE3 (manufacturer SIEMENS), 90 kW, 3~ 400 V, IP55; suitable for operation with frequency inverter
● Sealing materials: Silicone; PTFE, sealing material conforms to EU and FDA food hygiene standards
● Grinding elements: Pin rotor: 4 pin rows, pin Ø 7 mm (wear-reduced); Pin stator: 3 pin rows without external pin circle, pin Ø 7 mm
● Bearings: Designed for toughest operational demands in continuous industrial service, heavy-duty bearing housings with temperature and vibration monitoring (early detection of potential bearing failure and avoidance of hot surfaces)
● Inert gas supply/monitoring for shaft seal on product chamber side
Hedpfjx Ac Rbex Ac Njff
● Run monitoring to detect operating faults
● Machine frame: The complete unit – mill, drive with motor, tensioning rails, belt drive, and belt guard – is installed ready for use on a sturdy machine frame with height-adjustable machine feet
Main components of the offered system include:
● Product feed/transfer from customer’s upstream process and transfer to a rotary valve (certified ATEX protection system);
● Industrial pin mill type REKORD 630-SSt with welded housing and ground surfaces;
● Product separator with discharge rotary valve (certified ATEX protection system);
● Pneumatic conveying line with air inlet/outlet, including suction blower;
● WITHOUT control system, without frequency inverter
该广告为自动翻译,可能存在翻译错误。
供應商
注意: 免费注册或登录,以获取所有信息。
注册于: 2025
2 在线广告
发送询价
电话 & 传真
+43 664 8... 广告
这些广告您可能也感兴趣。
小广告
Wiefelstede
7,268 km
径向钻孔机
Raboma12Rh2000
Raboma12Rh2000
小广告
Delmenhorst
7,248 km
不锈钢容器/罐
Inox Behälter GmbH
Inox Behälter GmbH
小广告
Erftstadt
7,478 km
袋装灌装封口机
alpha-pack GmbHModell DEDAPHS-140S
alpha-pack GmbHModell DEDAPHS-140S
小广告
Elz
7,422 km
真空灌肠机 Vemag DP 6
VemagDP6
VemagDP6
小广告
Privalj
7,138 km
清洗水果和蔬菜、橄榄的机器
NN Masina za ispiranje voca i povrca
NN Masina za ispiranje voca i povrca
小广告
Newton Aycliffe
7,739 km
食用油精炼厂,产能150吨/天
GEA WESTFALIA150 TPD
GEA WESTFALIA150 TPD
小广告
Sottrum
7,210 km
拖拉机
JCBFastrac 3200 inclusive Mulag Front Heck Mäher
JCBFastrac 3200 inclusive Mulag Front Heck Mäher
小广告
Hamburg
7,141 km
工业搅拌机
AMTECAMTCE MX9000 RIB
AMTECAMTCE MX9000 RIB
小广告
德国
7,232 km
带式焙烧炉
CeselsanCS 2500 Plus
CeselsanCS 2500 Plus
您的广告已成功删除
发生错误

































































































