厚度刨床

Hofmann D 636

4-knife TERSA cutter head for planer
Motor power 7.5 kW
Positioning control for the thickness table
Segmented infeed roller
Segmented pressure bar
Feed speeds of 7 + 14 m/min
Table extension

Planing width 625 mm, chip removal up to 8 mm, planing height 3.5-305 mm
Thickness table mounted on four support spindles and with 4-point guidance.
Heavily ribbed cast iron table, finely planed
Modern control panel ergonomically positioned.
Electric thickness table adjustment with LED display. Buttons for adjusting in rapid or slow mode,
Adjustment accurate to 1/10 mm; integrated operating hour counter. Electronic starting and braking system. Electronic, wear-free brake for safe stopping of the
cutter head. Infeed roller in rubber and two rubber outfeed rollers (high quality, low wear)
Segmented pressure bar, rotary knob with scale, for adjusting the pressure (preload) of the
Ibjdpfx Asz Dkftelaeb
outfeed pressure bar
Two feed speeds 7 + 14 m/min; electrically switchable, also during planing
Thickness hood with carpet support, can be used as a storage area for wood.
Dust extraction port Ø 160 mm, to the left (can also be on the right – can be easily converted on site)
Air velocity 22 m/s
Integrated tool storage compartment for operating tools and planing knives
Electrical equipment according to VDE/EN 60204 with main switch, emergency stop button and 2nd emergency stop button on the
discharge side, winding protection, undervoltage protection, contact for controlling the dust extraction, accessories: 1 set of knives installed, operating tools, grease gun, operating manual
Weight: approx. 1000 kg
CE-compliant, BG-Holzstaubgeprüft No. HM 23001
Workplace-related emission values dB(A) according to DIN 45635 Part 1650
Idle noise approx. 69 dB(A), operating noise approx. 79 dB(A)
Workplace-related dust emission value: 0.44 mg/m³

该广告为自动翻译，可能存在翻译错误。