K1型木材加工中心

Hans Hundegger AG K1

Equipment:
01_ Cross-sections 20 x 60 to 300 x 450 mm
02_ Feed conveyor, transverse, 5 strands, 2.2 m
03_ Undercutting miter saw
04_ Universal milling machine
----> Roller cutter
----> Finger cutter
05_ Combination support for vertically operating tools
----> 1x Drilling machine
----> 1x Finger milling machine
06_ Combination support for horizontally operating tools
----> 2x Drilling machine
----> 1x Grooving machine
07_ Beam turning station, fully automatic

Machine installation:
08_ Substrate, foundation:
----> The floor slab must have a thickness of at least 10 cm (with corresponding good reinforcement)
This should be level and suitable for anchoring.
09_ Power requirements, type, quality, quantity:
09.1_ Electrical:
----> Voltage: 400/230V, 3/N/PE
----> Fuse rating: 3 x 63A
----> Frequency: 50 Hz
----> Peak demand: 15 kW
The mains voltage must be constant and uninterrupted within the specified tolerance range!
09.2_ Compressed air:
Tjdpfx Aezv Tt Hjkrob
----> Flow rate: V < 600 l/min
----> Pressure: Operating pressure p = 8.5 bar; Maximum permissible pressure p = 10 bar

Important:
The control system was converted by Hundegger from MIPPS to CAN control in the fall of 2020!!

该广告为自动翻译，可能存在翻译错误。