带干燥机的螺杆式空压机+270升储气罐CORMAK
LUFT 700 VSD+PM COMPACT/ 270l tank
带干燥机的螺杆式空压机+270升储气罐
CORMAK
LUFT 700 VSD+PM COMPACT/ 270l tank
固定价格 不含增值税
€3,270
出厂年份
2026
状况
全新
位置
Siedlce 

机器数据
价格和位置
固定价格 不含增值税
€3,270
- 位置:
- Brzeska 120, 08-110 Siedlce, Polska

拨打
优惠详情
- 广告编号:
- A21043037
- 更新:
- 最近更新时间为 22.01.2026
描述
CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER
SET INCLUDES:
LUFT 700 VSD+PM COMPACT screw compressor with dryer
Horizontal compressed air tank – 270 L
Key Features of the Energy Saver Series
1. Permanent Magnet (PM) Motor Technology
Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they:
Achieve efficiency levels of IE4 or even IE5
Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range)
Are smaller, lighter, and generate less heat
2. Advanced VSD Inverter Control
The heart of the Energy Saver line is the frequency inverter (VSD).
Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy.
Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process.
3. Soft Start
Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which:
Saves the electrical installation in the facility
Rjdpfoycg I Sox Ah Dsw
Allows frequent start/stop cycles without overheating the windings
4. Real Energy Savings
In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors.
Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters.
Longer service life: No sudden pressure and temperature spikes prolong the screw stage life.
Technical Specifications
Motor power: 5.5 kW / 7.5 HP
Voltage: 400V / 50Hz
Air delivery at 0–6 bar: avg. 690 L/min
Air delivery at 6 bar: 690 L/min
Air delivery at 8 bar: 650 L/min
Air delivery at 10 bar: 650 L/min
Outlet connection (G): 1/2"
Dimensions: 1495 × 520 × 1340 mm
Weight: 250 kg
SET INCLUDES:
LUFT 700 VSD+PM COMPACT screw compressor with dryer
Horizontal compressed air tank – 270 L
Key Features of the Energy Saver Series
1. Permanent Magnet (PM) Motor Technology
Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they:
Achieve efficiency levels of IE4 or even IE5
Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range)
Are smaller, lighter, and generate less heat
2. Advanced VSD Inverter Control
The heart of the Energy Saver line is the frequency inverter (VSD).
Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy.
Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process.
3. Soft Start
Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which:
Saves the electrical installation in the facility
Rjdpfoycg I Sox Ah Dsw
Allows frequent start/stop cycles without overheating the windings
4. Real Energy Savings
In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors.
Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters.
Longer service life: No sudden pressure and temperature spikes prolong the screw stage life.
Technical Specifications
Motor power: 5.5 kW / 7.5 HP
Voltage: 400V / 50Hz
Air delivery at 0–6 bar: avg. 690 L/min
Air delivery at 6 bar: 690 L/min
Air delivery at 8 bar: 650 L/min
Air delivery at 10 bar: 650 L/min
Outlet connection (G): 1/2"
Dimensions: 1495 × 520 × 1340 mm
Weight: 250 kg
供應商
注意: 免费注册或登录,以获取所有信息。
最近在线: 今天
注册于: 2020
500 在线广告
发送询价
电话 & 传真
+48 25 63... 广告
这些广告您可能也感兴趣。
小广告
Lorquí
8,789 km
ATLAS COPCO GA50 螺杆式空压机
Atlas CopcoGA50 VSD
Atlas CopcoGA50 VSD
小广告
德国
7,492 km
配备TruBend 5085加长版和BendMaster 60的TRUMPF TRUBEND Cell 5000
TRUMPFTRUBEND Cell 5000 with TruBend 5085 extended version and BendMaster 60
TRUMPFTRUBEND Cell 5000 with TruBend 5085 extended version and BendMaster 60
小广告
Berlin
6,991 km
灌装封杯机
Steven BV
Steven BV
小广告
Δράμα
6,746 km
胶版印刷类型
ShinoharaSHINOHARA 75
ShinoharaSHINOHARA 75
您的广告已成功删除
发生错误





























