工业废气CORMAK
DCV11300TC
工业废气
CORMAK
DCV11300TC
固定价格 不包含增值稅
€6,950
製造年份
2025
狀況
全新
位置
Siedlce 

顯示圖片
显示地图
机器数据
价格和位置
固定价格 不包含增值稅
€6,950
- 位置:
- Brzeska 120, 08-110 Siedlce, Polska

撥打
优惠详情
- 產品ID:
- A16875826
- 最後更新:
- 於 04.12.2025
描述
The manufacturer guarantees the quality of purification.
A certified control cabinet allows for constant monitoring of the correctness of operation.
The negative pressure fan 11 kW / 11300 m3/h, operates on the turbine principle, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation.
Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season
Advantages of DCV dust extractors
Durable, massive construction guaranteeing quiet and vibration-free operation of the dust absorber
the new TC series of extractors has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air
Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season
Strong and quiet radial fan guaranteeing you high negative pressure efficiency
Possibility of building a ceiling system and connecting several machines working simultaneously with DCV extractors
Failure-free filter shaking system with the possibility of working in an automatic cycle
Mobile drive system facilitating trouble-free movement of extractors throughout the plant
Waste containers designed in such a way as to maintain 99.99% airtightness of the system, have also been equipped with a mobile system mobile
Control cabinet for switching the device on/off
The polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used
It is prohibited to use this extractor in an explosive atmosphere
The extractor is not adapted to work with wet raw materials (e.g. wet sawdust)
Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers
Reduction - Warm air return additionally payable
Technical parameters
Supply voltage 400 V
Power 11 kW
Engine speed 3000 rpm
Filter type Polyester
Filter dimensions Φ160 x 960 mm
Number of filters 64 pieces
Inlet diameter 350 mm
Outlet diameter 500 mm
Efficiency 11300 m3/h
Dimensions (width x length x height) 1190 x 3160 x 2320 mm (without upper elbow)
Net weight 710 kg
Cjdpoudalwofx Afxehf
A certified control cabinet allows for constant monitoring of the correctness of operation.
The negative pressure fan 11 kW / 11300 m3/h, operates on the turbine principle, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation.
Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season
Advantages of DCV dust extractors
Durable, massive construction guaranteeing quiet and vibration-free operation of the dust absorber
the new TC series of extractors has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air
Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season
Strong and quiet radial fan guaranteeing you high negative pressure efficiency
Possibility of building a ceiling system and connecting several machines working simultaneously with DCV extractors
Failure-free filter shaking system with the possibility of working in an automatic cycle
Mobile drive system facilitating trouble-free movement of extractors throughout the plant
Waste containers designed in such a way as to maintain 99.99% airtightness of the system, have also been equipped with a mobile system mobile
Control cabinet for switching the device on/off
The polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used
It is prohibited to use this extractor in an explosive atmosphere
The extractor is not adapted to work with wet raw materials (e.g. wet sawdust)
Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers
Reduction - Warm air return additionally payable
Technical parameters
Supply voltage 400 V
Power 11 kW
Engine speed 3000 rpm
Filter type Polyester
Filter dimensions Φ160 x 960 mm
Number of filters 64 pieces
Inlet diameter 350 mm
Outlet diameter 500 mm
Efficiency 11300 m3/h
Dimensions (width x length x height) 1190 x 3160 x 2320 mm (without upper elbow)
Net weight 710 kg
Cjdpoudalwofx Afxehf
您的广告已成功删除
发生错误


















