铸模

Casadei MATRIX 4+1

4-SIDE PLANER/MOULDER, 4 CUTTERHEADS + UNIVERSAL SPINDLE, 2.5M TABLE & HEAVY-DUTY MOTORS
Brand: CASADEI Model: MATRIX 4+1
Serial No.: 02-84-022 Year: 2002

WORKING CAPACITY (thickness x width): 6 to 155 x 25 to 230 mm
- 4-sided planer and moulder
- Working width: 25 to 230 mm
- Working height (timber thickness): 6 to 155 mm
- Max. finished timber section: 155 x 230 mm
- Min. working length: 480 mm
- Adjustable cutting depth: max 10 mm
- Spindle rotation speed: 6,000 rpm

PLANER/MOULDER CONFIGURATION:
- Sturdy welded steel frame
- Soundproof panoramic hood with gas struts
- Raised operator control panel
- 2,500 x 250 mm steel infeed table
Floor height: 880 mm
Side-entry spring-loaded feed roller
Manual table lubrication unit after surfacing
1) Bottom horizontal spindle 5.5 kW
TERSA cutterhead Ø125 x h.240 mm
1 retractable vertical roller presser
Nwedpfx Aju Sr Ivegpsh
2 & 3) Right then left vertical spindles, 1 x 7.5 kW each
TERSA cutterheads Ø125 x h.165 mm
4) Top horizontal spindle 7.5 kW
TERSA cutterhead Ø125 x h.240 mm
Adjustable exit pressure pad
5) Universal spindle 7.5 kW
Ø 40 x 255 mm
1 retractable horizontal roller presser

FEED SYSTEM:
- Variable feed speed: 5 to 25 m/min
Feed motor: 1.1 kW (1.5 HP)
- 8 independent pneumatic feed rollers:
2+2 grooved steel, then 2+2 rubber-coated

OTHER SPECIFICATIONS:
- CE marking
- Power supply: 380V, 3-phase, 50 Hz
- Lockable main switch, automatic star-delta starters
Emergency stops front/rear
- Installed power: 37 kW (50 HP), IN 62A
- Braked motors
- Cardan shaft spindle drives
- Digital readouts (Siko-type counters) for precise manual adjustment of each operation
- Electric raise/lower beam for thickness adjustment,
Raise/lower motor: 0.37 kW
- Axial spindle adjustment:
Bottom horizontal: 0 to 15 mm
Top horizontal: 0 to 25 mm
Verticals: 0 to 25 mm
- Acceptable cutter/tool dimensions:
On bottom horizontal spindle: Ø 120 to 140 mm
Profiling on vertical spindles: Ø 100 to 180 mm
Profiling on top horizontal spindle: Ø 100 to 180 mm
End milling cutter: Ø140 x 12 x 40 mm
- Recommended pneumatic supply: 7 bar
Working pressure: 6 bar
Average consumption: 0.85 Nl/cycle
Connector: 1/2" G
- Dust extraction, central upper port: Ø250 mm
Required air speed: min. 25 m/sec Airflow: 4,500 m³/h
- Technical manual included.
- Machine fitted with 4 TERSA shafts
Footprint: 4,700 x 1,700 x h.1,800 mm
Weight: 2,240 kg
Please contact us for supply of consumables, accessories, and/or extraction systems.

该广告为自动翻译，可能存在翻译错误。